The JSLT-CG-T-20B1 is a heavy-duty T-profile guideway for ISO 20B-1 chain (pitch 31.75 mm — sized for cement, mining, and steel-mill conveyors). The 45 mm base footprint and 15 mm overall height handle chain pull forces above 50 kN without creep, deflection, or stick-slip. The 18.0 mm chain channel is 30 % wider than ISO minimum so abrasive dust does not bridge the pocket and lift the roller off the wear surface.
Cross-section — all dimensions in mm. Drawn to 1:1 scale (within page width).
In abrasive bulk-handling lines, UHMWPE PE1000 outwears AISI 304 steel by 4–7×. The 45-mm wide base lets you fit two parallel rails with shared bolt centres, halving the installation labour for double-strand chain runs. Service temperature −200 °C to +85 °C handles cold-room, ambient, and warm cement-line operation without grade swaps. Replaceable wear strip — bolt-down, no welding, no machining required on site.
ISO 20B-1 single-strand roller chain (pitch 31.75 mm). Compatible with all chains conforming to ISO 606 / DIN 8187 / BS 228 envelopes, including ANSI #100, BS 20B-1, JIS RC127 equivalents. Roller, plate, and pin geometry of these standards are interchangeable; the JSLT-CG-T-20B1 guideway profile accepts any of them without modification.
CNC-milled groove with R-radius transitions, surface roughness Ra ≤ 1.6 µm typical. Polished groove option available for sticky-product lines.
| JSLT Part Number | JSLT-CG-T-20B1 |
|---|---|
| Profile Type | Type T — Single-Row Polymer Chain Guideway |
| Chain Standard | ISO 20B-1 / ANSI equivalent |
| Chain Pitch | 31.75 mm |
| Number of Rows | 1 |
| Base width (mm) | 45.0 mm |
| Overall height (mm) | 15.0 mm |
| Shoulder height (mm) | 10.8 mm |
| Chain pocket width (mm) | 18.0 mm |
| Chain pocket depth (mm) | 4.2 mm |
| Standard Lengths | 1000 / 2000 / 3000 / 4000 / 5000 / 6000 / 8000 mm |
| Default Stock Length | 3000 mm |
| Custom Length | Cut to your drawing — no extra cost |
| MOQ | 1 piece (sample) — no minimum on production runs |
| Lead Time | 5–15 days from drawing approval |
All four UHMWPE grades are stocked in-house. Default for this profile is highlighted.
Send your DWG / DXF / PDF / STEP — we quote in 24 hours, MOQ 1 piece, lead time 5–15 days.
Standard hole patterns, counterbores, end chamfers, mitre cuts, and curved guide segments are all routine — no setup fee on first articles. Send a sketch, photo or full 3D STEP file and we will return a fully-quoted spec sheet within one working day.
Use the 3D preview file to validate fit in your assembly. Production files (DXF / STEP) are released after we confirm tolerances together.
Tell us about your project. We respond within 12 hours.
