The JSLT-CG-T2-06B2 is a compact double-row T-profile chain guideway sized to 2-strand ISO 06B-2 roller chain (pitch 9.525 mm). Its 25 × 10 mm cross-section carries 2 parallel chain pockets (5.3 mm wide each) separated by 1 channel of 5.0 mm — so twin-strand chain runs stay perfectly synchronised, with the same wear life on every strand. Cut to length and drilled to your drawing in our 8 000 m² plant — single sample welcome.
Cross-section — all dimensions in mm. Drawn to 1:1 scale (within page width).
For twin-strand packaging lines, mismatched chain wear forces you to replace both rails together to avoid timing drift. The JSLT-CG-T2-06B2 keeps both pockets at identical depth from a single CNC cut, so strand-to-strand wear stays inside ±0.05 mm for the full service life. UHMWPE PE1000's 0.10–0.20 dynamic friction coefficient against polished steel pins eliminates chain lubrication entirely in food-grade installations.
ISO 06B-2 2-strand roller chain (pitch 9.525 mm). Compatible with all chains conforming to ISO 606 / DIN 8187 / BS 228 envelopes, including ANSI #30, BS 06B-2, JIS RC38 equivalents. Roller, plate, and pin geometry of these standards are interchangeable; the JSLT-CG-T2-06B2 guideway profile accepts any of them across all 2 parallel pockets without modification.
CNC-milled groove with R-radius transitions, surface roughness Ra ≤ 1.6 µm typical. Polished groove option available for sticky-product lines.
| JSLT Part Number | JSLT-CG-T2-06B2 |
|---|---|
| Profile Type | Type T2 — Double-Row Polymer Chain Guideway |
| Chain Standard | ISO 06B-2 / ANSI equivalent |
| Chain Pitch | 9.525 mm |
| Number of Rows | 2 |
| Base width (mm) | 25.0 mm |
| Overall height (mm) | 10.0 mm |
| Shoulder height (mm) | 8.5 mm |
| Number of chain pockets | 2 mm |
| Chain pocket width (mm) | 5.3 mm |
| Chain pocket depth (mm) | 1.5 mm |
| Number of channels | 1 mm |
| Channel width (mm) | 5.0 mm |
| Standard Lengths | 500 / 1000 / 2000 / 3000 / 4000 mm |
| Default Stock Length | 1000 mm |
| Custom Length | Cut to your drawing — no extra cost |
| MOQ | 1 piece (sample) — no minimum on production runs |
| Lead Time | 5–15 days from drawing approval |
All four UHMWPE grades are stocked in-house. Default for this profile is highlighted.
Send your DWG / DXF / PDF / STEP — we quote in 24 hours, MOQ 1 piece, lead time 5–15 days.
Standard hole patterns, counterbores, end chamfers, mitre cuts, and curved guide segments are all routine — no setup fee on first articles. Send a sketch, photo or full 3D STEP file and we will return a fully-quoted spec sheet within one working day.
Use the 3D preview file to validate fit in your assembly. Production files (DXF / STEP) are released after we confirm tolerances together.
Tell us about your project. We respond within 12 hours.
