The JSLT-CG-CT-12B1-24-14 is a mid-duty single-row CT-type steel-backed guideway matched to 2-strand ISO 12B-1 chain (pitch 19.05 mm — the global workhorse pitch for food, beverage, and assembly conveyors). The UHMWPE PE1000 wear-strip (28 × 18 mm overall) carries 2 chain pockets (8.3 × 2.4 mm), locked into an SS304 tube C2812 via a 12.5 mm slot so the cap overhangs and seals the SS tube from above.
Cross-section — all dimensions in mm. Drawn to 1:1 scale (within page width).
This is the single-strand rail you'll see in heavy-duty European bottling and assembly plants where chain replacement intervals matter more than initial cost. The SS304 tube takes the chain pull (over 30 kN per strand allowable); UHMWPE only sees abrasion and friction. When the polymer wears out at 18–36 months, slide a fresh strip in from the tube end face — no machine downtime longer than a coffee break, no machining on site. The 15.6 mm shoulder height gives chain plates a dedicated wear surface so they never contact the SS edge.
ISO 12B-1 2-strand roller chain (pitch 19.05 mm). Compatible with all chains conforming to ISO 606 / DIN 8187 / BS 228 envelopes, including ANSI #60, BS 12B-1, JIS RC76 equivalents. Roller, plate, and pin geometry of these standards are interchangeable; the JSLT-CG-CT-12B1-24-14 guideway profile accepts any of them across all 2 parallel pockets without modification.
CNC-milled groove with R-radius transitions, surface roughness Ra ≤ 1.6 µm typical. Polished groove option available for sticky-product lines.
| JSLT Part Number | JSLT-CG-CT-12B1-24-14 |
|---|---|
| Profile Type | Type CT — Steel-Backed Polymer Chain Guideway |
| Chain Standard | ISO 12B-1 / ANSI equivalent |
| Chain Pitch | 19.05 mm |
| Number of Rows | 1 |
| Overall base width (mm) | 28.0 mm |
| Overall height (mm) | 18.0 mm |
| UHMWPE cap height (mm) | 6.0 mm |
| Number of chain pockets | 2 mm |
| Chain pocket width (mm) | 8.35 mm |
| Chain pocket depth (mm) | 2.4 mm |
| Number of channels | 1 mm |
| Channel width (mm) | 11.3 mm |
| SS304 tube outer (W × H mm) | 28 × 12 mm |
| SS304 wall thickness (mm) | 1.5 mm |
| SS304 tube top slot (mm) | 12.5 mm |
| SS304 tube profile code | C2812 mm |
| Standard Lengths | 1000 / 2000 / 3000 / 4000 / 5000 / 6000 mm |
| Default Stock Length | 2000 mm |
| Custom Length | Cut to your drawing — no extra cost |
| MOQ | 1 piece (sample) — no minimum on production runs |
| Lead Time | 5–15 days from drawing approval |
All four UHMWPE grades are stocked in-house. Default for this profile is highlighted.
Send your DWG / DXF / PDF / STEP — we quote in 24 hours, MOQ 1 piece, lead time 5–15 days.
Standard hole patterns, counterbores, end chamfers, mitre cuts, and curved guide segments are all routine — no setup fee on first articles. Send a sketch, photo or full 3D STEP file and we will return a fully-quoted spec sheet within one working day.
Use the 3D preview file to validate fit in your assembly. Production files (DXF / STEP) are released after we confirm tolerances together.
Tell us about your project. We respond within 12 hours.
