The JSLT-CG-T-16B1-40-15 is a mid-duty T-profile guideway matched to ISO 16B-1 chain (pitch 25.4 mm — the global workhorse pitch for food, beverage, and assembly conveyors). Its 40 mm-wide base footprint distributes clamp-down force across the full bolt grid, while the centred 16.0 × 3.5 mm chain pocket — machined to ISO 606 envelope tolerance — keeps the roller silent and self-aligning under combined side and axial loads. Production-ready in 5–15 days from drawing approval.
Cross-section — all dimensions in mm. Drawn to 1:1 scale (within page width).
This is the rail you'll see in 80 % of European bottling plants. The 11.5 mm shoulder height gives chain plates a dedicated wear surface so they never contact a steel frame edge — the failure mode that retires chains 18 months before their calculated L10 life. The base width is sized to common DIN 8187 sprocket centres; bolt the rails straight to a standard 50 × 50 mm aluminium extrusion grid with no shimming.
ISO 16B-1 single-strand roller chain (pitch 25.4 mm). Compatible with all chains conforming to ISO 606 / DIN 8187 / BS 228 envelopes, including ANSI #80, BS 16B-1, JIS RC101 equivalents. Roller, plate, and pin geometry of these standards are interchangeable; the JSLT-CG-T-16B1-40-15 guideway profile accepts any of them without modification.
CNC-milled groove with R-radius transitions, surface roughness Ra ≤ 1.6 µm typical. Polished groove option available for sticky-product lines.
| JSLT Part Number | JSLT-CG-T-16B1-40-15 |
|---|---|
| Profile Type | Type T — Single-Row Polymer Chain Guideway |
| Chain Standard | ISO 16B-1 / ANSI equivalent |
| Chain Pitch | 25.4 mm |
| Number of Rows | 1 |
| Base width (mm) | 40.0 mm |
| Overall height (mm) | 15.0 mm |
| Shoulder height (mm) | 11.5 mm |
| Chain pocket width (mm) | 16.0 mm |
| Chain pocket depth (mm) | 3.5 mm |
| Standard Lengths | 1000 / 2000 / 3000 / 4000 / 5000 / 6000 mm |
| Default Stock Length | 2000 mm |
| Custom Length | Cut to your drawing — no extra cost |
| MOQ | 1 piece (sample) — no minimum on production runs |
| Lead Time | 5–15 days from drawing approval |
All four UHMWPE grades are stocked in-house. Default for this profile is highlighted.
Send your DWG / DXF / PDF / STEP — we quote in 24 hours, MOQ 1 piece, lead time 5–15 days.
Standard hole patterns, counterbores, end chamfers, mitre cuts, and curved guide segments are all routine — no setup fee on first articles. Send a sketch, photo or full 3D STEP file and we will return a fully-quoted spec sheet within one working day.
Use the 3D preview file to validate fit in your assembly. Production files (DXF / STEP) are released after we confirm tolerances together.
Tell us about your project. We respond within 12 hours.
